Tanaka AD-6, Instruction Manual

Page: 15 / 45

- 14 -
2 Installation
2.1 Installation Site
!
Warning: The tester must be installed in a well-ventilated
environment.
!
Warning: Install the tester on a strong level table.
Keep inflammable substances away from the tester.
Ensure that a fire extinguisher is kept near the tester.
If the table is unstable, the tester may fall down
causing a fire.
Install the tester on a strong, level bench in a well-ventilated location.
Do not expose the tester to any of the following:
·
High temperatures (> 30
°
C)/ low temperatures (< 10
°
C) or high humidity (> 90%)
·
Direct sunlight
· Dust
·
Rapid temperature changes
2.2 Setting of Fire Containment Shutter
Lift and fix the Fire Containment Shutter to the hook.
2.3 Electrical Connections
!
Warning: Observe the following instructions when handling
power cables and electric connections:
·
Do not connect or disconnect any cables or electrical
connections when the mains power is ON.
·
Do not handle any cables or electrical connections
with wet hands.
·
Never use the cord to pull a plug from an outlet.
·
Do not place heavy items on cords or cable.
·
Do not use force to bend any cords or cables.
·
Ensure that all electric connections (plugs, sockets,
connectors, etc.) are free of dust.