Tanaka AD-6, Instruction Manual

Page: 5 / 45

- 4 -
WARNINGS AND CAUTIONS FOR SAFE USE
Failure to follow all of the warnings and cautions listed below may result in
damage to the tester and/or serious personal injury.
Tanaka Scientific Limited will not assume any responsibility for faults or
accidents arising from failure to adhere to these instructions.
Installation Environment
!
Warning: The tester must be installed in a well-ventilated
environment.
As samples release inflammable and/or toxic gases,
inadequate ventilation may result in poisoning.
!
Warning: Install the tester on a strong level table.
Keep inflammable substances away from the tester.
Ensure that a fire extinguisher is kept near the tester.
If the table is unstable, the tester may fall down
causing a fire.
Electric Connection
!
Warning: Observe the following instructions when handling
power cables and electric connections:
·
Do not connect or disconnect any cables or
electrical connections when the mains power is
ON.
· Do not handle any cables or electrical
connections with wet hands.
·
Never use the cord to pull a plug from an outlet.
·
Do not place heavy items on cords or cable.
·
Do not use force to bend any cords or cables.
· Ensure that all electric connections (plugs,
sockets, connectors, etc.) are free of dust.
·
Keep all cables and electrical connections free of
water and other liquids.