Tanaka AD-6, Instruction Manual

Page: 43 / 45

- 42 -
(24) Additional accessories: (Optional)
▪ Dry Point Sensor with Centering Device for 125ml Flask
⇒
Necessary for automaic dry point detection for ASTM D86 distillation
test
▪ BTX Temperature Sensor Distllation Flasks (200 ml) Silicon Stopper No.S8
Dry Point Sensor with Centering Device for 200ml Flask Flask Support
Boards (Ø25, 32 mm holes)
⇒
Necessary for ASTM D850/1078 distillation test
▪ Distllation Flask (250 ml) Flask Support Boards (Ø70 mm holes)
Graduated Cylinder Assembly (200 ml) (
12
)
⇒
Necessary for distillation test with 10% distillation residue
Note (
12
) : The actual capacity at the mark of the 200 ml graduated cylinder assembly is 186
±
1ml.
Cutting of the heater for this sample at 88 to 89% produces 10% residue of about 18.6
ml.
・
Data Management System ADMgr
⇒
Necessary for printing distillation curves or printing data using a PC
Functionality: Printing distillation curves, accumulating and storing
distillation results, displaying statuses on Model AD-6, transferring
distillation results (RS-232C), and sending/receiving and storing set
test parameters
Operating environment
PC: PC/AT-compatible machine
OS: Windows2000/XP/Vista
CPU: Pentium 300 MHz or faster
RAM: 128 MB or more
HDD: 20 MB or greater space
CDD: Built-in or external
I / O : RS-232C 9P port (Two ports necessary when
using the distillation result transfer function)
If a CP has only USB port, a RS-232C/USB
Cnverter is required.
For details, refer to the ADMgr catalog.