TallyGenicom T6200 Series, Operator'S Manual

Page: 44 / 92

Operator Manual
3–8
Tx/Cx Style
This allows you to select the default font style used by emulations attached to
the Twinax and Coax ports (except IPDS).
Style selections
Draft (High-speed)
DP (Data Processing, Default selection)
Gothic (Sans Serif NLQ)
Courier (Serif NLQ)
OCR-A (Optical Character Recognition)
OCR-B (Optical Character Recognition)
IPDS Style
This allows you to select the default font style used by the IPDS emulation.
Style selections
Draft (High-speed)
DP (Data Processing, Default selection)
Gothic (Sans Serif NLQ)
Courier (Serif NLQ)
CPI
This parameter allows you to select characters per inch (CPI) settings. The
possible selections are 5, 6, 6.67, 7.5, 8.33, 8.57, 10, 12, 13.33, 15, 16.67,
17.14, and 20. The default is 10 CPI.
Panel Language
This option allows you to set up the printer to display messages on the Control
Panel in a particular language. Printed reports also display in your chosen
language. The possible selections are English (default), German, French,
Italian, Swedish/Finish, and Spanish.
OCR Standards
This parameter defines the combination of ANSI and DIN standards to be used
for the OCR-A and OCR-B character sets. The default value is dependent on
the emulation. The possible selectiosn are:
A: ANSI B:ANSI This means ANSI OCR-A and ANSI OCR-B
A: DIN B:ANSI This means DIN OCR-A and ANSI OCR-B
A: ANSI B:DIN This means ANSI OCR-A and DIN OCR-B
A: DIN B:DIN This means DIN OCR-A and DIN OCR-B
Zero
As an aid in distinguishing zeros from the uppercase letter O, you can choose
to have your zeros slashed (Ø). Default is open (non-slashed) zeros.
Compressed 8
Use this option for higher lines per inch settings to decrease the space be-
tween the dot-rows of the printed characters. This increases the vertical
spacing between each printed line, which increases readability without chang-
ing the current LPI settings. Compressed 8 functions at 8 LPI and above (at
any CPI). Setting this parameter to ON causes all characters printed at 8,
9,10, or 12 LPI to be compressed vertically. The default is OFF.