TallyGenicom T6200 Series, Operator'S Manual

Page: 51 / 92

3–15
Chapter 3: Printer Menus and Configuring Your Printer
Vertical Format Units (VFU) Category
VFU Enable
A Vertical Format Unit is a means for loading sets of vertical tabs. These
vertical tabs define various parameters of a form. This parameter applies only
to the emulations which make explicit use of the VFU channels. Setting this
parameter to Enabled causes the printer to use the last loaded EVFU instead
of using the Form Length, Top Margin, and Bottom Margin settings. When an
EVFU is loaded, this parameter is automatically set to Enabled. The default is
Disabled.
VT Channel (Vertical Tab Channel)
You can select which VFU Channel is designated as the Vertical Tab Channel.
This parameter applies only to the emulations which makes explicit use of the
VFU channels. Selections are 1 - 12 and Unused. The default depends on the
emulation as defined in the table under the Emulation selection parameter.
Skip When
This parameter applies only to the emulations which make explicit use of the
VFU channels. This parameter designates where the Skip Length distance will
begin - before or after the Bottom of Form channel. The Skip location is deter-
mined by using the designated Bottom-of-Form Channel in the downloaded
VFU. The Skip When parameter only functions when the VFU Environment is
enabled. The default depends on the emulation as defined in the table under
the Emulation selection parameter.