TallyGenicom T6200 Series, Operator'S Manual

Page: 35 / 92

2–7
Chapter 2: Printer Control Panel
Clear Reset
The printer controller performs a hardware reset. You may use this in lieu of
cycling power to the printer. As with cycling power, the Powerup Configuration
is loaded as the Current Configuration (see Chapter 3).
Clear Cancel (Twinax and Coax only)
Allows you to send a Cancel Job message to the host via the I/O while the
printer is Offline. It performs the same functions as the Cancel Job request
when the printer is Online. The display reads "Cancel Job" and the printer
remains Offline.
For Coax, this function is valid only in NonSCS mode.
Clear Reprint (Coax only)
This allows you to reprint the previous buffer contents. After reprinting the
buffer, the printer returns to Enable Print condition and continues printing the
rest of the job. This option is convenient in cases of paper jams or any time
you do not need to send the complete job.
This function is valid only in Non SCS Mode. If you select this in SCS
Mode, an Invalid Key error message displays for a few seconds.
Config Key
Offline
This is a shortcut to the Load Configurations menu item (see Chapter 3),
allowing you to enter a menu where any of ten saved configurations can be
loaded into the Current Configuration.
Use the Up and Down Arrow keys to scroll through the configurations. Press-
ing the Enter key loads the one you choose.