TallyGenicom T6200 Series Operator'S Manual Download Page 70 | Manualshive

Page: 70 / 92

background image

Operator Manual

3–34

Twinax/Coax Category

Send PA (Coax Only)

There are two options for this category, PA1 and PA2. These options only
have meaning when the printer is in the SCS Mode. If they are selected while
the printer is in non SCS Mode, the Invalid Key error message will display
briefly. These options perform special functions that change from one soft-
ware application to another. Selecting one of these options while the printer is
operating in SCS Mode causes the printer to:

•

Display status code PA1 Key (61) or PA2 Key (62)

•

Send an attention response to the host computer.

•

Send a special operator request to the application program and wait
for a response back.

Certain application programs may ask you to select the PA1 or PA2 option in
this category. In this situation:

•

The printer display will read Enter PA Key (63).

•

The audible alarm beeps continuously.

•

The host opens a 10 minute "window" for one of the PA options to be
selected. If the correct PA option is not selected during this time, the
display clears, the audible alarm stops, and the printer sends a No PA
Key message to the host computer. The effect of this message is
application-dependent. Depressing the Online/Offline key clears this
condition.

Address (Twinax Only)

Sets the Twinax device address for the printer. The default is Undefined.

SPD (Coax Only)

When set to Disabled, this parameter causes the host Set Print Density com-
mand to be ignored. This is used to prevent the host from overriding control
panel CPI settings. Default is Enabled.

SCD (Twinax Only)

When set to Disabled, this parameter causes the host Set Character Density
command to be ignored. This is used to prevent the host from overriding
control panel CPI settings. Default is Enabled.

IPDS: This option is not available.

SLD

When this parameter is set to Disabled, the host Set Line Density command is
ignored. This prevents the host from overriding control panel LPI settings.
The default is Enabled.

IPDS: This option is not available.

«
...
68
69
70
71
72
...
»

Summary of Contents for T6200 Series





























































































Reviews:

No comments

Related manuals for T6200 Series

Brand: GCC Technologies Pages: 14

VarioPrint 6000 MICR series

Brand: Oce Pages: 264

Brand: Oce Pages: 194

Brand: Canon Pages: 4

PIXMA MG3220 series

Brand: Canon Pages: 4

Brand: Canon Pages: 22

Pixma G3020 Series

Brand: Canon Pages: 34

Pixma MG3500 Series

Brand: Canon Pages: 3

Pixma MG7100 Series

Brand: Canon Pages: 4

PIXMA G7000 Series

Brand: Canon Pages: 16

Brand: Canon Pages: 10

Brand: Canon Pages: 4

Brand: Canon Pages: 132

Brand: Canon Pages: 62

MF3110 - ImageCLASS Laser Multifunction

Brand: Canon Pages: 2

PIXMA MG3220 series

Brand: Canon Pages: 7

Brand: Canon Pages: 2

Brand: Canon Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands