TallyGenicom 6605, User Manual

Page: 80 / 212

80
Chapter 4
Config Menu
Modplot
This parameter eliminates the need to send an Align to Line Boundary
Command (Tally ANSI) or an extra Line Feed (LF) Control Code (Printronix)
when exiting Plot Mode. Whenever you are using Plot Mode in these
emulations, set this parameter to ON to avoid graphic and text alignment
problems. Modplot ON is the default selection. In addition to Code V and PGL
graphics, this parameter also applies to Tally ANSI and Printronix style
graphics. It does not apply to text following Epson or Proprinter graphics.
Version
This parameter controls the version of Code V the printer emulates. Version 2
is the default selection.
Descender
This parameter controls insertion of the character descender gap between
print lines.
•
Fixed (default). The descender gap is always inserted after the line
whenever Descender Mode is ON regardless of whether descenders are
present or not.
•
Auto. The descender gap is only inserted after lines containing
characters with descenders.
Vertical Scale
This parameter determines whether vertical block characters will be scaled to
the same dimensions as horizontal block characters.
•
Style1 (default). Adds intercharacter gap after the character has been
rotated.
•
Style2. Does not add gap.
•
Off. Vertical block characters will be compressed vertically due to the
higher vertical density (72 DPI vs. 60 DPI).
On