TallyGenicom 6605, User Manual

Page: 56 / 212

56
Chapter 4
Quick Setup
•
LAN Emul (LAN Interface only). Used to select the emulation attached
to the Ethernet port when using the Ethernet interface. The possible
selections are the same as the Ser/Par Emul option.
•
Length (Lines). To define the length of your form in lines, select a form
length from 1 to 255. The default is 66 lines.
•
Length (Inches). To define the length of your form in inches, select a
form length from 0.1 to 25.5 inches. The default is 11.0 inches.
•
CPI. This parameter allows you to select characters per inch (CPI)
settings. The possible selections are 5, 6, 6.67, 7.5, 8.33, 8.57, 10, 12,
13.33, 15, 16.67, 17.14, and 20. The default is 10 CPI.
•
LPI. This parameter allows you to set the lines per inch (LPI). The
possible selections are 1.5, 2, 3, 4, 5, 6, 8, 9, 10, and 12. The default
setting is 6 LPI.
Parameter Tally ANSI
Genicom
ANSI
P5000 P6000 P600
Character Set Latin 1 Code Pg 437 Code Pg 437 Latin1 Latin1
OCR-A ANSI ANSI ANSI ANSI ANSI
OCR-B ANSI ANSI ANSI ANSI ANSI
Auto CR OFF ON ON ON OFF
Line Wrap OFF ON OFF OFF OFF
Wrap LF OFF ON OFF OFF OFF
Code 7F FILL FILL Space Space Space
VT Channel 2 12 N/A 12 12
Skip When Before Before N/A After After
Parameter HP 2564C DEC LG01
Epson
FX-1180
IBM
Proprinter
MTPL
Character Set Roman-8 DEC Multi Italic Code Pg 437 Code Pg 437
OCR-A ANSI ANSI ANSI ANSI ANSI
OCR-B ANSI DIN ANSI ANSI ANSI
Auto CR OFF OFF ON ON ON
Line Wrap OFF OFF ON ON ON
Wrap LF OFF OFF ON ON ON
Code 7F FILL FILL Delete Char Ignore Delete Buffer
VT Channel 12 12 N/A N/A N/A
Skip When After After N/A N/A N/A