TallyGenicom 6605, User Manual

Page: 181 / 212

Commands
181
CONFIG PANEL LOCK
UNLOCK
This command locks the operator
out of the printer’s configuration
menu.
This command unlocks the printer’s
configuration menu and allows the
operator access to the menus. By
default, the menu is unlocked.
PNE_PORT_NUM Port Number This command sets the Port
Number the PNE uses to
communicate to the printer if the
PNE Port was set to Ethernet. This
command causes the printer to
automatically reboot.
FILE_IO
(DISK_IO) CAPTURE Filename Captures all incoming data into a file
named Filename. Receipt of a
FILE_IO–CAPTURE command
without the Filename parameter will
force the file data to be written to
flash, and will end the file capture.
DRIVE Letter This command is parsed for
backwards compatibility. However,
since the flash file system is a single
device, the drive letter will be
ignored.
PROPS File;Prop The PROPS command will set the
file properties of a given file. The file
properties are a four letter, case
sensitive file descriptor. The
properties field can be used to
ensure that a file is used for its
intended purpose. Once properties
have been associated with a file,
they can not be changed.
DEL Filename The DEL command will mark a file
as deleted. The space the file
occupied will be freed the next time
the printer is powered up.
Table 10. PTX_SETUP Commands (Non-Platform Specific) (continued)
Command Sub-Command Parameter Description