TallyGenicom 6605, User Manual

Page: 33 / 212

Reload Paper
33
23. Pedestal models:
Using the vertical position knob to move the paper up, guide the paper
over the upper paper guide and through the slot to the rear of the top
cover. For pedestal models with the Quick Access Cover, refer to the
Quick Setup Guide for paper exiting options.
24. Press the FF key several times to make sure the paper feeds properly
beyond the tractors and over the lower paper guide. Feed sufficient paper
to ensure the paper stacks correctly.
25. Cabinet models:
Open the cabinet rear door. Make sure the paper is aligned with the label
in the output area (inside the cabinet). Close the front and rear doors.
Figure 15. Aligning the Perforation with the TOF Indicator
26. Align the top of the first print line with the TOF indicator on the tractor by
rotating the vertical position knob. For best print quality, it is
recommended that the top-of-form be set at least one print line or more
below the perforation.
NOTE: For exact positioning, perform a short press of the VIEW key to move
the last data printed to the tractor area for viewing. While in View
mode “Printer in View” displays. Press the Up or Down Arrow keys to
move the paper vertically in small increments. Pressing the VIEW key
a second time moves the paper back to the adjusted print position.
The key works both online and offline provided that the printer is in
View mode. (This procedure is applicable for both the cabinet and
pedestal models.)
TO
F
TOF
TOF
TO
F
183448b
TOF Indicator
Perforation
Vertical
Position
Knob