TallyGenicom 6605, User Manual

Page: 125 / 212

Fault Messages
125
B42 ERROR: SDRAM
ROWS NOT
ALLOWED* No Printer boot initialization
tests detect incorrect
SDRAM. Cycle power to see if the message
clears, if not, contact your
authorized service representative.
1
B43 ERROR: SDRAM
TOO MANY BANKS* No Printer boot initialization
tests detect incorrect
SDRAM. Cycle power to see if the message
clears, if not, contact your
authorized service representative.
1
B44 ERROR: SDRAM
NOT 64 BITS WIDE* No Printer boot initialization
tests detect incorrect
SDRAM. Cycle power to see if the message
clears, if not, contact your
authorized service representative.
1
B45 ERROR: SDRAM
IS WRONG VOLTAGE* No Printer boot initialization
tests detect incorrect
SDRAM. Cycle power to see if the message
clears, if not, contact your
authorized service representative.
1
B46 ERROR: SDRAM
HAS MIXED SIZES* No Printer boot initialization
tests detect incorrect
SDRAM. Cycle power to see if the message
clears, if not, contact your
authorized service representative.
1
B47 ERROR: SDRAM
LARGER THAN 256M* No Printer boot initialization
tests detect incorrect
SDRAM. Cycle power to see if the message
clears, if not, contact your
authorized service representative.
1
B49 ERROR: SDRAM
# LOGICAL BANKS* No Printer boot initialization
tests detect incorrect
SDRAM. Cycle power to see if the message
clears, if not, contact your
authorized service representative.
1
B50 ERROR: SDRAM
LOGIC COMB BANKS* No SDRAM DIMM is not
compatible with the
computer. SDRAM DIMM
may not be properly
installed. Cycle power to see if the message
clears, if not, contact your
authorized service representative.
1
B50 STATUS: XX%
CLEAR FLASH No Emulation software
sucessfully loaded in
RAM. Old program being
deleted from flash
memory. No action is required.
B51 STATUS: XX%
LOADING... No Status message: printer
boot-up routines are
loading printer system
software into flash
memory and SDRAM. No action required.
B53 ERROR: 12C NO
ARBITRATION No There is a problem on the
I
2
C bus which allows the
SDRAM DIMM to
communicate with the
GPIO or CT interface.
Cycle power to see if the message
clears, if not, contact your
authorized service representative.
1
Table 8. LCD Message Troubleshooting Table
Displayed Message
Can User
Correct?
Explanation Solution