TallyGenicom 6605, User Manual

Page: 28 / 212

28
Chapter 3
Operational Procedures
Figure 9. Setting the Platen Lever
8. Turn the platen stop knob clockwise or counterclockwise to match the
paper thickness. (The A-B-C scale corresponds approximately to 1-, 3-,
and 6-part paper thickness).
NOTE: If you are using the same thickness of paper, there is no need to
readjust.
9. Lower the platen lever until it stops.
10. Press the FF key several times to make sure the paper feeds properly
beyond the tractors and over the lower paper guide. Feed sufficient paper
to ensure the paper stacks correctly.
11. Press CLEAR to remove the “LOAD PAPER” fault message from the
display.
12. Close the printer top cover. Close the cabinet front door.
13. Press ONLINE to place the printer in online mode and resume printing.
183444 REV B
183444b
183446b
Platen Lever
Vertical Position
Knob
Platen Stop
Knob
A
Platen
Stop
183445b
Paper Thickness
Indicator
A