TallyGenicom 6605, User Manual

Page: 27 / 212

Reload Paper
27
1. Raise the printer cover. Raise the platen lever as far as it will go.
(See Figure 5 on page 20 for the location of the lever.)
NOTE: Do not open the tractor doors or remove the existing paper.
2. For cabinet and quiet pedestal models, open the front door. Align the
paper supply with the label on the floor. Ensure the paper pulls freely from
the box.
3. Feed the paper up through the paper slot (see Figure 7). It may be easier
to feed one corner of the new paper up through the slot first. When this
corner can be grasped from the top, rotate the paper back to the normal
position.
NOTE: If you are using thick, multi-part forms and are unable to load the new
paper over the existing paper, go to step 14.
4. Hold the paper to prevent it from slipping down and through the paper
slot.
Figure 8. Loading New Paper into the Printer
5. Pull the new paper above and behind the ribbon mask, but in front of the
existing paper. See Figure 5 on page 20 for the ribbon mask location.
If necessary, gently press the existing paper back.
6. Align the top edge of the new paper with the top perforation of the existing
paper.
7. Load the new paper over the existing paper. Open and load the tractors
one at a time to prevent the paper from slipping.
NOTE: Make sure that the top edge of the new paper lines up with the top
horizontal perforation of the last page.
183888a
New Paper
Existing Paper