TallyGenicom 6605, User Manual

Page: 61 / 212

Font Submenu
61
OCRA Density
This parameter sets the density for the OCRA font. There are three options:
•
Standard (default). Prints at 85 DPI vertical.
•
Enhanced. This option causes the OCR-A font to print at 96 DPI vertical.
•
High. This option causes the OCR-A font to print at 144 DPI vertical.
Standard and Enhanced print at the same speed, but the enhanced font is
slightly shorter than the Standard. High prints at a slower speed.
Ser/Par Style
This option allows you to select the font style for use by emulations attached
to the Parallel, Serial, and LAN port. For emulations that support downloaded
fonts, you can use this parameter to select the download font. The default is
DP.
Style selections include:
Draft (High-speed)
DP (default) (Data Processing)
Gothic (San Serif NLQ)
Courier (Serif NLQ)
OCR-A (Optical Character Recognition)
OCR-B (Optical Character Recognition)
Download (Selects the downloaded font)
CPI
This parameter allows you to select characters per inch (CPI) settings. The
possible selections are 5, 6, 6.67, 7.5, 8.33, 8.57, 10, 12, 13.33, 15, 16.67,
17.14, and 20. The default is 10 CPI.
Panel Language
This option allows you to set up the printer to display messages on the
Control Panel in a particular language. Printed reports also display in your
chosen language. Possible selections are English (default), German, French,
Italian, Spanish, and Portuguese.
OCR Standards
This parameter defines the combination of ANSI and DIN standards to be
used for the OCR A and OCR B character sets. The default value depends on
the emulation. The possible selections are:
•
A:ANSI B:ANSI (default). This means ANSI OCR-A and ANSI OCR-B.
•
A:DIN B:ANSI. This means DIN OCR-A and ANSI OCR-B.
•
A:ANSI B:DIN. This means ANSI OCR-A and DIN OCR-B.
•
A:DIN B:DIN. This means DIN OCR-A and DIN OCR-B.