Takeuchi TB295W, Operator'S Manual

Page: 80 / 305

2-28
CONTROLS
MULTI-INFORMATION DISPLAY
(4) AUXILIARY 2ND/4TH FLOW RATE
SETTING
One pattern of the auxiliary 2nd/4th flow rate
can be set.
Initial
condition
Standard flow
Variable
range
Auxiliary 2nd
C/D
100%=55L/min
(14.5 US gpm)
10 to 100%
Auxiliary 4th
G/H
100%=55L/min
(14.5 US gpm)
10 to 100%
The table shows the 1-way flow rate when
there is no load.
Refer to the trip meter setting for the key
operation. To move the cursor in the
direction of the arrow, use the Down ( ) key.
To move the cursor in the opposite
direction of the arrow, use the Up ( ) key.
Pressing the Enter key while the cursor is
at “Select ATT” goes to the attachment
select screen.
Pressing the Down ( ) key will move the
blue flashing light in the direction of the
arrow.
Pressing the UP ( ) key will move the blue
flashing light in the opposite direction of the
arrow.
Move the blue flashing light to the desired
symbol or the number, and then press the
Enter key to confirm.
The selected symbol will appear at the lower
left of the Home screen.