Takeuchi TB295W, Operator'S Manual

Page: 104 / 305

2-52
CONTROLS
ACCESSORIES
(3) Temperature switch (TEMP)
Use this switch to set the temperature inside
the cab to between 18.0 and 32.0°C (64 and
90°F).
The set temperature value appears on the
LCD display (7).
Set the temperature as follows.
Press the button to increase the
temperature.
Press the button to decrease the
temperature.
(4) Air outlet mode switch (MODE)
Use this switch to select an air outlet mode.
Pressing the MODE switch (4) will cycle
through the air outlet modes on the LCD
display (7). The air comes out from the
corresponding air outlet(s).
The air outlet automatically changes while in
automatic operation.
LCD Outlet mode
Face mode:
Front (defroster)
and rear outlets
Bi-level mode:
Defroster, rear and
foot outlets
Foot mode:
Foot outlet
(5) Automatic operation switch (AUTO)
The air outlet temperature, fan speed, air
outlet mode and Circulation/Ventilation are
automatically selected to achieve the set
temperature while in automatic operation.
Automatic operation procedure
1. Press the AUTO switch (5) to display the
settings of temperature, fan speed, ,
AUTO and air outlet mode on the LCD (7).
2. Use the TEMP switch (3) to set the desired
temperature. To stop the operation, press
the OFF switch (1).
Note: While in automatic operation, no warm
air is delivered in the or if the engine
coolant is cold.
Note: When changing the operation from
automatic to manual, operate the
corresponding switches to change the
settings such as the fan speed and air outlet
mode. Doing so will turn off the AUTO
display, indicating that the automatic mode
has been cancelled.
The automatic operation will not be cancelled
if only the Circulation/Ventilation switch is
operated.
Manual operation procedure
1. Use the fan switch (2) to set the desired
fan speed.
2. For cooling or heating with dehumidifying,
press the A/C switch (8). The turns on to
indicate that the air conditioner has been
turned on.
3. Use the TEMP switch (3) to set the desired
temperature.
4. Press the MODE switch (4) to select the
desired outlet mode.
5. Press the Circulation/Ventilation switch (6)
to select either one.
To stop the operation, press the OFF
switch (1).