Tait TB9100, Installation And Operation Manual

Page: 30 / 144

30 General Safety and Regulatory Information TB9100 Installation and Operation Manual
© Tait Electronics Limited May 2006
Dust and Dirt
For uncontrolled environments, the level of airborne particulates must not
exceed 100 µg/m
3
.
2.2 Regulatory Information
Distress Frequencies
The 406 to 406.1MHz frequency range is reserved worldwide for use by
Distress Beacons. Do
not program transmitters to operate in this frequency
range.
FCC Compliance
This equipment complies with:
■
Part 15 Class B of 47CFR: Radiated and conducted emissions, and
electromagnetic susceptibility specifications of the Federal
Communications Commission (FCC) rules for the United States.
Operation is subject to the following two conditions:
a. This device may not cause harmful interference, and
b. This device must not accept any interference received, including
interference that may cause undesired operation.
■
Part 68 of 47CFR: (Connection of terminal equipment to the telephone
network) of the FCC rules and the requirements adopted by ACTA.
This equipment’s FCC certification number (
US: 6FPOTNANTBA1PA0
)
is displayed on the label to be found towards the rear of the left-hand
(RF) side of the reciter. If requested, you must provide this number to
the telephone company. (This approval applies solely to the
TPA1PA0
Network Board in the Reciter.)
TTE Information
USOC Jacks: RIJCX (where required)
Service Order Code: 7.0Y
Facility Interface Code: 04N02, TL31E
Warnings:
If the TPA1PA0 Network Board in the Reciter causes harm to the telephone
network, the telephone company will notify you in advance that temporary
discontinuance of service may be required. But if advance notice isn't
practical, the telephone company will notify the customer as soon as
possible. Also, you will be advised of your right to file a complaint with the
FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment,
operations or procedures that could affect the operation of the equipment.
If this happens the telephone company will provide advance notice in order
for you to make necessary modifications to maintain uninterrupted service.