Tait TB9100, Installation And Operation Manual

Page: 31 / 144

TB9100 Installation and Operation Manual General Safety and Regulatory Information 31
© Tait Electronics Limited May 2006
Connection to party line service is subject to state tariffs. Contact the state
public utility commission, public service commission or corporation
commission for information.
If trouble is experienced with the TPA1PA0 Network Board in the Reciter,
for repair or warranty information, please contact:
Tait North America Inc
Building 1, Suite 450
15740 Park Row
Houston, Texas 77084
E-mail: usa@taitworld.com
Web: www.taitworld.com
Only approved Tait Dealer or Customer Service Organizations equipped
with the necessary facilities should perform any servicing. Repairs
attempted with incorrect equipment or untrained personnel may result in
permanent damage. If the equipment,
TPA1PA0 Network Board in the
Reciter, is causing harm to the telephone network, the telephone company
may request that you disconnect the equipment until the problem is solved.
Unauthorized Modifications
Any modifications you make to this equipment which are not authorised by
Tait Electronics Ltd may invalidate your compliance authority’s approval to
operate the equipment.
Health, Safety and Electromagnetic Compatibility in Europe
In the European Community, radio and telecommunications equipment is
regulated by Directive 1999/5/EC, also known as Radio and
Telecommunications Terminal Equipment (R&TTE) directive. The
requirements of this directive include protection of health and safety of users,
as well as electromagnetic compatibility.
Intended Purpose of
Product
This product is an FM radio transceiver. Its intended purpose is for radio
communication in Private Mobile Radio (PMR) services or Public Access
Mobile Radio (PAMR) services.
Important
This product can be programmed for frequencies or emis-
sions that may make its use illegal. A license must be
obtained before this product is used. All license require-
ments must be observed. Limitations may apply to transmit-
ter power, operating frequency, channel spacing and emis-
sion.