Tait TB9100, Installation And Operation Manual

Page: 52 / 144

52 Installation TB9100 Installation and Operation Manual
© Tait Electronics Limited May 2006
4.6 Connecting Up the Base Station
This section provides information on the inputs and outputs available when
connecting up the TB9100 base station.
Base Station Connections
The connections at the rear of a 5W or 50W base station are identified in
Figure 4.8 .
Figure 4.8 5W or 50W base station inputs and outputs
b serial RS-232 connector h -VDC input
c digital line connector i +VDC input
d analog line connector j auxiliary 12VDC output
e 1 pps input 1) AC mains input
f external reference frequency input 1! RF input
g RF output 1@ subrack ground connector
c d
f e
h
g
i
PA
reciter
PMU
1)
b
j
1!
i 1!
1@