Tait TB9100, Installation And Operation Manual, Page: 50 / 144

50 Installation TB9100 Installation and Operation Manual
© Tait Electronics Limited May 2006
Important
The slide mounting rails are not suitable for transporting a
cabinet fitted with a fully built-up TB9100 base station. In
this case, you must also fit the TBA2140 auxiliary support
brackets to the upper set of rear mounting holes
c
(support
bracket not shown in diagram).
General Cabling
We recommend that you try to route all cables to and from the TB9100 base
station along the side of the cabinet so the cooling airflow is not restricted.
DC Power Cabling
DC power cables should be well supported so that the terminals on the
PMU and on the ends of the cables do not have to support the full weight
of the cables.
Figure 4.7 on page 51 shows two recommended methods of securing these
cables to prevent straining either set of terminals.
Figure 4.6 Optional slide mounting rail - rear view
b
c