Tait TB9100, Installation And Operation Manual

Page: 91 / 144

TB9100 Installation and Operation Manual Technical Description 91
© Tait Electronics Limited May 2006
8 Technical Description
8.1 Mechanical Assembly
This section illustrates the main mechanical components that comprise the
TB9100 base station.
Figure 8.1 below shows the configuration for a typical
5 W or 50 W base station.
Note
Figure 8.1 shows the cooling fans and their ducts detached from
the front panel only for the clarity of the illustration. The cooling
fans and ducts are normally screwed to the rear of the front panel.
.
Figure 8.1 Mechanical assembly - front panel, fans and control panel
b front panel i airflow separator
c PMU fan j cable retaining clip
d PA fan 1) subrack
e PMU fan duct 1! reciter
f PA fan duct 1@ plastic guide rail
g PMU 1# module retaining clamp
h PA 1$ control panel
b
c
d
e
f
g
h
i
j
1)
1!
1@
1#
1$
5 or 50W base station shown