64
Operator´s manual BIO bale processor B4000
+
5.9
PIA mode
Description
PIA mode = Process independent activation.
PIA mode displays all individual functions of a complete cycle with
icons. The desired function is preselected using the joystick and then
activated by pressing the OK key. Functions can be controlled
independenty from the process mode.
Key combinations:
Press the MAN/AUTO & FUNCTION keys simultaneously to activate
the PIA mode.
NOTE:
Any information on the state of the baling & wrapping process is
deleted.
Starting the binding process
The net is running for 6 seconds (net pulses are not considered). The
amount of net material wrapped around the bale depends on the
baler speed (540 RPM correspond to approx. 3 turns). When the
binding process is completed, the control system will automatically
pass to the next icon:
Opening the top section of the bale chamber
When the sensor gives the «top section open» message, the control
system will automatically pass to the next icon:
Starting the film wrapping cycle
The preselected number of turns is applied to the bale. When the
wrapping process is finished, the control system will automatically
pass to the next icon:
Film cutting
Satellite and film cutter are operated so that the films are cut off
accurately. When the «film cutter down» sensor is activated, the
control system will automatically pass to the next icon:
Unloading the bale
Once the ring raised and the bottom section of the bale chamber
lowered, the control system will automatically pass to the next icon:
Summary of Contents for BIO+ B4000
