manualshive.com logo in svg

Taarup BIO+ B4000, Operator'S Manual

Share
Download
Taarup BIO+ B4000 Operator'S Manual Download Page 70

70

Operator´s manual BIO bale processor B4000

1

6.1.6 Tyre air pressure

Tyre size

Normal Pressure

Max pressure

500/50-17", 8 ply

1.2 bar (17psi)

1,6 bar (22psi)

500/45-22,5", 8 ply

0.7 bar (10psi)

1,6 bar (22 psi)

600/40-22.5", 8 ply

0.8 bar (11psi)

1.6 bar (22 psi)

6.1.5.2 Changing the blades OC 23

Open the top section of the bale chamber
using hydraulic power.

Close tap (1) to lock the top section.

Swing out the cutting unit using hydraulic
power.

Close both taps for the variable blade
engagement in groups on the right-hand
machine side.

Turn the blade shaft by moving lever (d)
down.

Grip blade at the end, pull out upwards
clear of the blade shaft and then remove
to the bottom.

When necessary turn the feed drum to
alter the position of the tines.

Sharpen the blades (only when
disassembled!).

Install the blades in the reverse order.

NOTE:

Work only with sharp blades. This will
considerably reduce power requirement.

Summary of Contents for BIO+ B4000















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands