Taarup BIO+ B4000, Operator'S Manual

Page: 52 / 78

52
Operator´s manual BIO bale processor B4000
5.5.5 Manual configuration
Allows operator to change any of the Manual steps (net binding
start, film wrapping start, discharge start, close chamber) in the
complete bale processing cycle.
0 = automatic progress
1 = progress by operating =/OK switch
2 = not included
3 = operate OK switch once for discharging and once more to
close chamber (valid value for discharging set-up only)
5.5 User functions screen displays
User function screens offer parameters that may be changed/configured by the operator.
The user functions can be activated when the Joystick function key is pressed in the Idle
mode. The screens that appear are listed in the next section. Stepping to the next screen can be
accomplished by operating the joystick. Moving the joystick to the right will step to the next
screen, stepping to the previous screen is done by moving the joystick to the left. When a pa-
rameter has to be changed/edited, activate any of the four edit switches: clear (C switch), plus
(joystick up), minus (joystick down) or enter (‘=/OK’ switch).
Pressing the STOP key in any step of this mode will finish the editing/monitoring and return to
Idle mode screen.
5.5.1 User functions activated
Shows that user function screens are activated.
5.5.2 Screen contrast
Allows editing of the screen contrast, min. 35 %/max. 65 %. Dur-
ing editing the screen contrast changes according to the current
value in the screen.
5.5.3 Net wrap setting
Allows editing of the net wraps.
x.x B (no. of net wrap when film wrapping is excluded)
x.x BW (no. of net wraps when film wrapping is included)
5.5.4 Bale counters
First value shows current job counter, value can only be reset by
operating Info key. Second value shows the total counter of the
machine. This value can neither be reset nor edited by the opera-
tor.
The computerised control system