Taarup BIO+ B4000, Operator'S Manual

Page: 55 / 78

55
+ 2x
L’unità di controllo computerizzata L’unità di controllo computerizzata
5.6 Process mode screen displays
5.6.1 Tool mode screens
& simultaneously, then press twice
Process screens with all manual joystick operation modes:
The first process screen shows that the joystick manual control
is assigned to the pick-up and cutter knives adjustment. To
change selection, press the Joystick function key.
Then next screen will show up and indicate that the joystick func-
tion is assigned to control of bottom and top chamber sections.
The last joystick function is assigned to operate the prestretcher
ring and the film cutters.
The upper-left part of the screen shows the current number of
laps done and the programmed number of laps. The pro-
grammed number of laps can be edited by pressing the left-hand
Select key and add/deduct numbers by operating the +/– joystick
function.
The computerised control system
5.6.2 Automatic process screen
The automatic process screen is indicated by the text AUTO in
the upper right corner of the screen. The joystick operation will
be assigned to pick-up and cutter knives.
5.6.3 Manual process screen
The manual process screen is indicated by the manual icon
(open hand) in the upper right corner of the screen. The manual
mode can be configured in the User function screen number 5.
The three main subcycles Net binding, Film wrapping and Un-
loading can be programmed to start either automatically or by
confirmation using the =/OK switch.