Taarup BIO+ B4000, Operator'S Manual

Page: 53 / 78

53
5.5.7 Automatic cutting knives & pick-up operation
The computerised control system
First parameter gives access to the setting of the automatic cut-
ting knives operation, i.e. disengaging knives automatically when
chamber has reached 90% filling.
Second parameter gives access to the setting of the automatic
pick-up operation, i.e. automatic lifting of pickup when net binding
starts and lowering of pick-up when chamber closes for next bale
0 = disengaged, knives/pick-up operated by joystick
1 = engaged
5.5.6 Film break sensor
Activates film break sensor and eventually ½ speed by film end.
0 = Film break sensor not activated
1 = Film break sensor activated
Film break is notified by audio signal, the ring continues to rotate
until STOP is pressed by the user.
When film break is solved, go back to operating screen restart
wrapping again with OK.
2 = Film break sensor is activated.
Film break is notified by audio signal and the satellite stops.
If the operator wants to continue wrapping with one film roller
only, reset error message with the C-key and activate the pro-
cess with OK. The system will automatically reduce the table
speed to ensure correct film overlap with only one film roll if the
½ speed kit is fitted.
If the operator wants to continue with two rollers, he has to
replace the roller before error message is reset. The process is
resumed by activating the OK-key.
The system will start with reduced speed, but will automatically
speed up within one rotation when it detects that both filmrollers
are OK.
Lost film application caused by the film break is corrected due to
added satellite rotations.