TA I
NSTRUMENTS
TMA 2940
4–7
Changing the
Instrument Mode
To learn how to change the instrument mode,
refer to the
Thermal Solutions/Advantage User
Reference Guide
for instructions.
The instrument must be placed into the film/fiber
mode before installing the film/fiber accessory in
order to prevent damage to the instrument or to
the accessory.
Installing the Film/
Fiber Probe
The special configuration of the film/fiber acces-
sory requires the installation of the probe before
the stage.
1. Insert the core end of the probe carefully
into the opening in the top plate.
2. Open the weight tray door and locate the
probe-locking lever.
3. Loosen the probe-locking lever and hold it
in the up position. Continue lowering the
probe until you can feel it exerting down-
ward pressure on the locking lever.
4. Align the slot in the top of the probe front to
back and tighten the probe-locking lever by
turning it clockwise.
5. Close the weight tray door.
Film/Fiber Accessory
t
CAUTION:
NOTE:
Summary of Contents for TMA 2940
