Running Experiments
TA I
NSTRUMENTS
TMA 2940
3–16
Setting Up an
Experiment
Once you have prepared the sample, the next
step in your experiment is to enter the needed
information in the TA controller. All of the
controller functions described in this section are
accessed through the
Instrument Control func-
tions. Refer to the online documentation to learn
how to perform the following steps.
1.
Select the Instrument.
2.
Select the Instrument Mode.
3.
Enter Sample Information.
4.
Enter Instrument Information.
5.
Create and Select Thermal Methods.
The first time you use your TMA 2940 you will
need to create at least one thermal
method
to
control experiments. Each method is made of
several
segments
, or individual instructions (
e.g.
,
Equilibrate, Ramp), that control the state of the
instrument.
Summary of Contents for TMA 2940
