T.Werk GmbH - CHRONOS Click Pitched roof solution - Assembly instruction Page 21 of 24
6 Clamp the modules
6.1
Click the CHRONOS middle clamp sets
into the CHRONOS Click profiles at the
clamping points.
6.2
Place a module and slide it onto the
CHRONOS middle clamp sets already
clicked into place at the beginning of
the rail. Make sure that there is a dis-
tance of 3.5 cm from the end of the
profile.
6.3
On the free-standing side at the begin-
ning of the row, place one compensat-
ing profile each on the CHRONOS mid-
dle clamp set (1).
Then screw in the cylinder head screw
of the CHRONOS centre clamp set with
a hexagon socket SW6 with a torque of
approx. 10 Nm (observe the specifica-
tions of the module manufacturer) (2).
6.4
Place the next module in the row
against the one already mounted.
1
2
