T.Werk GmbH - CHRONOS Click Pitched roof solution - Assembly instruction Page 20 of 24
5 Optional: Mount the second layer of CHRONOS Click Profiles (for cross mounting)
5.1
Measure and mark the second profile
layer.
5.2
Screw the CHRONOS cross connector
sets into the first profile layer at the
crossing points just marked (1).
Position the CHRONOS cross con-
nector sets exactly (2).
Screw in the cylinder head screw M8 x
14 of the CHRONOS cross connector
set with a hexagon socket SW6 at a
torque of 10 Nm to fix the CHRONOS
cross connector set on the first profile
layer (3).
5.3
After all CHRONOS cross connector
sets are fixed on the first profile layer,
click in the second profile layer accord-
ing to assembly step 4.
Screw a thin sheet metal screw
through the hole on the back of each
CHRONOS cross connector set to fix
the second profile layer. Use a hexa-
gon bit SW8 at a torque of 1 Nm.
5.4
The second layer of CHRONOS Click
Profile is applied.
