T.Werk GmbH - CHRONOS Click Pitched roof solution - Assembly instruction Page 19 of 24
4.4
Slide the CHRONOS rail connector on to
the end of the first profile at joints.
4.5
Click the second profile into the rail con-
nector (1). Then slide the rail connector
over both profiles (2).
4.6
Screw two thin sheet metal screws into
the holes provided in the rail connector
(one screw in each end of the profile). Use
a hexagon bit SW8 with a torque of 1 Nm.
4.7
The first layer of CHRONOS Click Profile is
attached.
