T.Werk GmbH - CHRONOS Click Pitched roof solution - Assembly instruction Page 13 of 24
Rafter
CHRONOS Click Profile
CHRONOS Roof hock
CHRONOS Rail connector
5.)
Observe the module manufacturer's specifications in the installation instructions for
clamping and module installation.
Assembly
1 Attach the roof fastening for a rafter roof (depending on variant 1 - 2)
Measure the first profile layer and the places for the roof hooks and then mark them.
1.1
Variant 1:
Rafter roof
Modules vertical
Single layer system
Roof fastening
1. Profile position
2. Profile position
CHRONOS RC
Specification for number and
placement of roof hooks:
statics, rafter spacing (65 -
120 cm).
Cantilever up to 500 mm
depending on snow load
With low snow loads and
small rafter spacing: roof
hooks on every second
rafter; edge area on every
rafter due to increased wind
suction loads.
Recommendation for even
loading: roof hooks alter-
nately on the rafters.
Two CHRONOS Click
profiles per module
row
Distance depends on:
Module
alignment,
module
dimensions,
clamping range of the
modules (specification
of the module manu-
facturer).
Distance
of
the
modules between the
rows: approx. 10 mm
Position of the profiles
depends
on
the
distance between tile
/roof panel
-
near the roof
hook, distance
max. 25 - 30 cm
