T.Werk GmbH - CHRONOS Click Pitched roof solution - Assembly instruction Page 18 of 24
4 Mount the first layer of CHRONOS Click Profile
4.1
Position the CHRONOS Click profiles at
the desired position on the roof (1). Make
sure that the connection point to the next
profile is close to a roof fastening point.
Insert the CHRONOS Click profiles on the
low side of the CHRONOS roof adapter so
that the profile is already slightly clipped
in there (2).
4.2
Two people should click the CHRONOS
Click Profile into place. Use a lever tool to
help you.
Place the lever tool on the CHRONOS Click
Profile near a roof fastening point. Place
the lever tool in the channel as shown in
the picture below.
Click the CHRONOS Click profiles com-
pletely into the CHRONOS roof adapters
one after the other.
If it should be difficult to click the profiles
into place, use silicone spray (available in
any DIY store).
4.3
Screw at least two thin sheet metal
screws (first and last CHRONOS roof
adapter) per clicked-in profile into the
hole pattern provided for this purpose on
the back of the CHRONOS roof adapter in
order to fix the CHRONOS Click profile.
Use a hexagonal bit SW8 at a torque of 1
Nm.
