T-Comfort Comfort Pro S, Mounting And Commissioning Manual

Page: 176 / 200

174
Configuring the PC Software Setting up NET CAPI
Installing the NET CAPI Driver
1. Call up the start mask from the product CD (see Configuring the PC Software on page 171).
2. Select Products : Comfort Pro : Install CAPI from the start mask and follow the programme instructions.
Configuring the NET CAPI Driver
The NET CAPI driver requires an extra internal number so that the “virtual ISDN card” on the Comfort Pro S
can be addressed:
1. Go to the Configurator, Telephony : Extended : CAPI-ISDN menu. Click on Change .
2. Activate the Status check box. Enter at least one unassigned, internal number in the boxes under
Parameters . Confirm your entry with Apply .
3. Go to the Configurator, User Manager: User menu. Select one of the users shown. Enter the number just
assigned in one of the boxes No. 1 to No. 10 . Confirm your entry with Apply .
4. If it is to be possible to call the “virtual ISDN card” externally, or if external calls are to be possible, the
number must be included in call distribution ( Configurator , Telephony: Call Distribution menu).
5. After installing the NET CAPI driver, you will find an extra icon on the right side of the Windows Start bar.
Click on this icon with the right mouse key. Select the Log-on command from the menu.
N
Note: In the subsequent dialogue you must log on NET CAPI first with the user (user
name and password) for which you configured the CAPI telephone number in the User
Manager (see Step 3).
You will find further information on the working of the NET CAPI driver and CAPI application programmes on
the product CD.
Note on Sending Faxes
The NET CAPI can address Group-4 digital ISDN fax receivers - but it does not address an analogue Group-3
fax. Use a CAPI-compatible modem-simulation driver or connect an analogue modem or analogue modem
card to one of the Comfort Pro S’s internal a/b ports for sending Group-3 faxes.