T-Comfort Comfort Pro S, Mounting And Commissioning Manual

Page: 45 / 200

43
Mounting Installation
Mounting
The device must be mounted in a suitable place. Please see the section on Mounting Location starting on
page 29 for details. The Comfort Pro S is attached to the wall by means of 3 screws as shown in the diagram
below:
Attachment diagram
Take the cover off the Comfort Pro S to screw in the screws for attchment point B and insert the screws
through the holes provided. The Comfort Pro S will hang on the screws in attachment point A, so you must
leave a space of 4 mm between the screw heads and the wall.
Port Assignment, Termination,
Cable Length
S
0
Ports
All S
0
ports can be externally connected (i. e. on ISDN network terminations). The S
0
2 port and all S
0
ports on
additionally installed interface cards can also be internally connected. Simultaneous use of one S
0
port as
internal and external port is not possible.
Attachment (back side of device)
A
266 mm
290 mm
Holes for attachment screws
B B