T-Comfort Comfort Pro S, Mounting And Commissioning Manual

Page: 140 / 200

138
Telephony PIN Code Telephony
5. Under the PIN dial header, select the desired Route . Select the user group created by the previous steps
for the User group setting. Confirm with Apply .
You can also use the “Standard” user group or the “External trunk” standard route for the “PIN Code
Telephony” feature. If you configure a special route, you must also enter a seizure code for this route
( Telephony : Trunks : Route menu, setting: Code ).
Activate the PIN dial user group option for all terminals which are to have the “PIN Code Telephony” feature
available to them. This can also be the “Guests” user group. Furthermore, you can also use the “PIN Code
Telephony” feature for users who have no terminal assigned to them (“virtual users”).
Implementation
You would like to use the “PIN Code Telephony” feature from any telephone. To do so, the telephone
belonging to another user is switched to your personal user account (“identity change”). Carry out the
following steps:
1. Call the main menu on a system telephone. Select the
6 Connections
:
7 PIN dialling
menu
entry. Enter your call number and your user PIN. If the entry is correct,
<PIN dialling>
now appears.
Now select the desired external call number including the seizure route for the “External Trunk” standard
route.
You can also initiate PIN dialling with a code procedure:
H#46 Z
(your no.)
* Z
(user PIN)
# Z
(external no.)
The route configured for the “PIN Code Telephony” feature is used to make a call in that the seizure code
for the standard route is also replaced by another seizure code if applicable. Furthermore, the
authorisations are activated for the user group designated for the “PIN Code Telephony” feature.
2. Make your call. Please note that the call number identity being used is displayed to the external caller
even when you are calling from a different terminal. In addition, the call number identity being used is
indicated as busy during the call. This is why the corresponding trunk key also lights up during this time
on the respective system telephone.
The external call number dialled is not saved in any redial list: neither on the telephone used, nor one's own
telephone.