SystemAir Danvent DV-10, User Manual

Page: 112 / 120

12—4
12.3 AC ‐ fan operation without thermistor for Danfoss FC101
Systemair factory set ‐ up is based on Danfoss initialization.
14 ‐ 22: Operation mode: [2] Initialisation (Danfoss Initialisation)
Turn power off and on.
Systemair factory set ‐ up:
0 ‐ 01: Language selection:
1 ‐ 03: Torque characteristic: [3] Auto ‐ Energy optim.
1 ‐ 20: Motor power: According to motor plate
1 ‐ 24: Motor Current: According to motor plate
1 ‐ 25: Motor Nominal Speed: According to motor plate
1 ‐ 29: Automatic motor adption (AMA): [1] Kompl.motor adaption to (Turn power off and on.)
1 ‐ 42: Motor Cable Length: Order specific
1 ‐ 50:
Motor Magnetisation at zero speed.:
0 %
1 ‐ 52:
Min. Speed Normal Magnetisation:
10 Hz
1 ‐ 73: Flying start: [1] Enable
5 ‐ 40.0: Function Relay: [3] Drive ready/remote
14 ‐ 03: Over modulation: [1] Active
14 ‐ 20: Reset Mode: [2] Automatic reset x 2
0 ‐ 50: LCP Copy: [1] All to LCP (Copy of Systemair factory settings to panel)
Connections:
0 ‐ 10V: terminal 54 ‐ 55
Start: terminal 12 ‐ 18
Drive ready: terminal 1 ‐ 2
Jumper terminal 12 ‐ 27