manualshive.com logo in svg

Synopsys DesignWare ARC AXC003, User Manual, Page: 2 / 145

Share
Download
Synopsys DesignWare ARC AXC003 User Manual Download Page 2

 

2 

 

 

Synopsys, Inc. 

Version 6323-018 

 

 

May 2017 

Copyright Notice and Proprietary Information Notice

 

© 2017 Synopsys, Inc. All rights reserved. This Synopsys software and all associated documentation are proprietary to Synopsys, Inc. 
and may only be used pursuant to the terms and conditions of a written license agreement with Synopsys, Inc. All other use, 
reproduction, modification, or distribution of the Synopsys software or the associated documentation is strictly prohibited.  

Destination Control Statement 

All technical data contained in this publication is subject to the export control laws of the United States of America. Disclosure to 
nationals of other countries contrary to United States law is prohibited. It is the reader's responsibility to determine the applicable 
regulations and to comply with them. 

Disclaimer 

SYNOPSYS, INC., AND ITS LICENSORS MAKE NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS 
MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE. 

Trademarks 

Synopsys and certain Synopsys product names are trademarks of Synopsys, as set forth at 

http://www.synopsys.com/Company/Pages/Trademarks.aspx

. 

All other product or company names may be trademarks of their respective owners. 

Third-Party Links 

Any links to third-party websites included in this document are for your convenience only. Synopsys does not endorse and is not 
responsible for such websites and their practices, including privacy practices, availability, and content. 

 

Synopsys, Inc. 
690 E. Middlefield Road

 

Mountain View, CA 94043 

www.synopsys.com

Summary of Contents for DesignWare ARC AXC003


















































































































































Reviews:

No comments