Synesso MVP, Technical Manual

Page: 59 / 80

59
PROGRAMMING
Menu Level 3: Configuration
See the previous page for instructions on how to access menu level 3.
This is the configuration screen.
Pressing a line button will flash the first adjustable value. Pressing it again will flash the next, and so on.
Model codes: H = MVP Hydra, S = MVP Single pump, C is not used at this time.
Bypass and boost values should reflect whether or not the machine has the appropriate hardware installed,
not whether they are being used. Since bypass hardware is only compatible with Hydras, the value will
change to
“ N ” if the model value is not “ H ”
The serial number entered on this screen is shown during the machine boot - up sequence.
If any settings on this screen are changed, the machine will require a restart upon exiting this screen. When
prompted, press the corresponding line button to restart or to cancel and revert to the previous settings.
Machines with firmware version 2.62 and above will display the Configuration screen as in the picture
above. This updated configuration includes model SX0 for the S
- Series machines.
Line 3 includes PRG for the purge function which is a standard function of S - Series machines only. For MVP
Series, PRG should be programmed as “ N ”.
To cycle to the next display screen or to lock in changes and restart, press the down button.