Synesso MVP, Technical Manual

Page: 51 / 80

51
This is the first screen of the 2nd level menu, the save lockout screen.
Line 2 can prevent the user from changing between M, MP, and VP mode. It will lock to the current mode.
Note: The left mode lockout is available only with firmware v2.55 and above.
Line 3 can prevent the accidental use of save mode. When this setting is “ locked ”, holding right on the group
heads will not enter save mode.
The shot timers will blink a red error light at the operator if the mode trying to be accessed is in lockout.
To cycle to the next display screen, press the down button.
On this screen, you can activate or deactivate program storage positions 2 through 6. Program #1 cannot be
deactivated. Shifting right while not brewing a shot will cycle through any program save locations currently
active in numerical order.
(1 - >2 - >5 - >1… as shown.) This setting is applied to all groups.
To cycle to the next display screen, press the down button.
PROGRAMMING
Menu Level 2: Lockout
Menu Level 2: Programs
Home
Button
4th Line Button
Access to Menu Level 2:
There are 3 levels of menus a technician can access through the wired controller:
Menu level 1 (described on pages 39 - 43) contains settings relevant to the day - to - day operation of the ma-
chine.
Menu level 2 may be reached from level 1 and contains settings relevant to technicians and machine owners.
To access menu level 2, first press the home button to return to the temperature overview screen. Next,
press and hold the home button. Press and release the 4th line button, then release the home button.