DOC 6511_Release K
ATS-6511A/B/C Users Guide
101
ATS-6511>save test
Query:
ATS-6511>list
default
test
See Also:
load, list, show, settings
Settings:
Description:
Show unit settings. The settings command displays all the settings variables
for the system. Settings variables are values that are settable by the user. They are not
automatically saved however so the user must use the save command in order to preserve
the settings across a power cycle. Also note that they represent the settings of the
instrument and not necessarily the current state of the instrument. This command is
equivalent to the show
settings
command and the settings variables also appear on the
status port (port 1900).
A specific subset of the settings variables can by requested by specifying the specific node
within the hierarchy that is desired. For instance,
settings gps
displays the current GPS
status for the system.
See Also: show, status, network, config, save, load
Syntax
: settings [-d MAX_DEPTH] [NODE]
MAX_DEPTH limit display to MAX_DEPTH levels of data
NODE specifies a node to display
Command Example:
ATS-6511>settings
See Also:
show, status, network, config, save, load
Show:
Description:
Show system information. The show command displays all the application
variables that are available for a user to view. These are the same variables that are output
on the status port (port 1900) except that they are displayed in a hierarchical view instead of
a list view. The status port is typically the preferred method for retrieving the current state
of the variables in an automated manner because it displays a complete list of the variables
when the connection is established and then only outputs values when they change.
There are 4 types of application variables and each has its own behavior:
•
config:
Config variables are values that are set at the factory and are not
modifiable by the user. They are stored on the hardware itself so replacing the
flash will not affect their value. They contain information such as the product part
number, serial number, and information specific to the hardware itself.
Summary of Contents for ATS-6511A
Page 6: ......
