Symbol Series 3800, Reference Manual

Page: 82 / 138

6-4
Series 3800 Product Reference Guide
2. Twist the D-ring on the bottom of the handle 90 degrees counterclockwise and
remove the end cap. The battery pack should drop out. If necessary, tap the terminal
against your hand gently to dislodge the battery.
Caution
If you intend to store your terminal without the battery pack, ensure you
have stored any data and/or programs you wish to keep on another terminal,
a host computer, or another medium to avoid loss of data. The terminal
backup power source retains data for approximately 15 minutes after the
battery pack is removed, as long as the lithium backup batteries remain in
place.
Installing the NiCd Battery Pack
W
ARNING
This procedure is not approved for, and should not be performed
in, potentially hazardous environments.
1. Insert the batterypack into the battery compartment in the handle of the terminal.
2. Replace the end cap and twist the D ring halfway clockwise to lock it.
3. Press the D-ring flat to secure it.