Symbol Series 3800, Reference Manual

Page: 34 / 138

2-12
Series 3800 Product Reference Guide
3. The DE-9onnector is used to attach the PIM’s DE-9 connector.
4. The power supply port is used to attach the 16-Volt power supply.
Connect the PC Adapter to 3800 and Serial Device
To set up the PC Adapter (refer to Figure 2-10):
Figure 2-10. Setting Up the PC Adapter
1. Turn the PC and terminal OFF.
2. Plug the DB-9 end of the PIM into the DB-9 port of the PC Adapter.
3. Attach the PIM’s optical connector to the LRT/LDT’s port.
4. Connect the RS-232 cable’s DB-25 connector to the PC Adapter.
5. Plug the other end of the RS-232 cable into the RS-232 device.
6. Plug the jack end of the 16-Volt power supply into the power supply port.
7. Plug the 16-Volt power supply’s cube into an electrical outlet.
The battery charge indicator LED flashes when the terminal power is turned on.
PIM
DB-9 Port
Optical
Connector
PC
Adapter
DB-25 RS-232 Cable
Connector
Power Supply
Power
Supply
Port