Symbol Series 3800, Reference Manual

Page: 30 / 138

2-8
Series 3800 Product Reference Guide
Connecting Power to the 3860 CCM
Only the power connection is required for charging batteries in the CCM.
1. Install the power supply.
a. Attach the power supply to the left side of the CCM as shown in Figure 2-7 using
two cross-head screws.
b. Connect the power supply plug to an AC wall outlet.
2. When the CCM is connected to power, all the LEDs flash at the same time for 3
seconds, flash once from left to right, and turn on for 3 seconds before going out.
Figure 2-7. Connecting the 3860 CCM for
Charging and Communications
Host
Power Port
Communication
Port
Power Supply
LEDs
RS-232
Serial Cable
Insert Screw
Insert Screw
3860 CCM