Symbol Series 3800, Reference Manual

Page: 57 / 138

4-17
Spectrum24 Terminal Setup
where:
The following message is displayed:
Press <ENTER> when remote is ready. ESC to abort...
3. Do NOT press <ENTER> yet. Set up the terminal as described in Initiate Terminal
Communications.
Initiate Terminal Communications
1. Power off the Series 384X and place it in the cradle.
2. Boot the 384X to Command Mode.
For the 35-key 384X:
"
Press and hold <BKSP + Shift>.
"
Press and release PWR.
"
Release <BKSP + Shift>.
For the 46-key 384X:
"
Press and hold <A + B + D>.
"
Press and release PWR.
"
Release <A + B + D>.
The terminal displays the function selector screen:
COMMAND MODE
Select function
Self Test
SENDHEX is the command.
LWP is the hex file being loaded. LWP.HEX is the hex file specifically for
the system files. There may be other hex files which load other
software, such as applications, to the flash disk.
384 is the baud rate (38,400 bps).
[1|2] sets the host’s communication port the cradle is connected to.