Symbol Series 3800, Reference Manual

Page: 20 / 138

1-4
Series 3800 Product Reference Guide
Accessories
The following accessories are available for 3800 terminals.
Battery Chargers
Series 3800 terminals use either a Nickel Cadmium (NiCd) battery or 9V battery pack. NiCd
batteries are charged using one of the charging accessories listed below.
Cradles
Cradles combine a communications device and battery charger, and are available with either
one or four slots.
!
3860 Charging and Communications Module (CCM) — Four-slot module for
charging NiCd battery packs in the terminal and spare battery packs; also performs
communications between terminals and a host, modem, or printer. See Related
Publications.
!
3865 Cradle Base Unit — Single-slot cradle for charging NiCd battery packs; also
performs communications between terminals and a host, a modem, or a printer. See
Related Publications.
!
3866 Cradle Base Module —þFour-slot cradle for charging NiCd battery packs in
the terminal and for communicating between terminals and a host, a modem, or a
printer. See Related Publications.
Printer Interface Module (PIM)
The Printer Interface Module works with the PC Adapter to perform communications
between the terminal and a host PC without a cradle. Refer to the section The PC Adapter
on page 2-11.
PC Adapter
The PC Adapter works with the PIM to communicate with the host PC without a cradle or
to charge a NiCd battery pack in the terminal without a cradle. Refer to the section The PC
Adapter on page 2-11.