SVAN 106 User MANUAL
_
88
In the position View the user can select the
different type of spectrum like: Averaged,
Instantaneous, Max or Min.
=>
In the case when the Averaged or
Instantaneous spectrum is selected the
user can additionally switch on the
presentation of Max and/or Min spectrum.
=>
10.9.
Selection of the channels for presentation – Multichannel View
The Multichannel View window enables
one to select for which channels spectrum
will be viewed during multi spectrum display
mode and to assign special color for the
spectrum curve.
<ENT>
10.10.
Setting the parameters for total values – Total Values
The position Total Values enables the user
to program parameters for total values
calculation. The are three total values,
calculated for each channel and for all three
total values it is possible to define weighting
filter, integration method and accordingly
type of signal measurement (acceleration,
velocity or displacement) as well as
calibration factor.
<ENT>
Summary of Contents for SVAN 106
Page 49: ...SVAN 106 User MANUAL _ 49...
Page 82: ...SVAN 106 User MANUAL _ 82...
Page 96: ...SVAN 106 User MANUAL _ 96 ENT ENT ENT ENT...
Page 97: ...SVAN 106 User MANUAL _ 97...
