Svantek SVAN 106, User Manual

Page: 78 / 97

SVAN 106 User MANUAL
_
78
The Factory Settings enables the user to
return to the default setup of the instrument.
The factory setup can be install also by
means of <Shift/Enter> and <Alt/Start>
push-buttons pressed together.
<ENT>
During the clearing process the message WAIT... is displayed. The
following message is displayed after the return to the default settings and
the instrument waits for the user’s reaction.
9.6. Locking the menu - Instrument Lock
The Menu Lock sub-list enables the user
to lock (Pertial or Full Lock) and unlock
the menu.
In the case of default No Lock option all
available positions in the menu are
accessible due to the settings, which were
made.
<ENT>
The activation of Partial results in locking access to the Menu options, which are responsible for
measurement parameters. In the case of Full Lock no one position from the Menu lists is accessible and
after attempt of enter Menu the Menu Lock window appears on the display. The Menu is available after
unlocking it.
9.7. Setting the scope of instrument's functions — Instrument Mode
The Instrument Mode sub-list enables the user to set the scope of
available instrument's functions. There are two possible modes of the
instrument: Simple Mode and Advanced Mode. Advanced Mode defines
the full scope of available functions, while Simple Mode defines limited
scope of available functions, excluding functions which are using quite rare,
like trigger, wave and event recording, user filters etc. Thus some menu
lists will have different view/contetn for different instrument modes.