Svantek SVAN 106, User Manual

Page: 56 / 97

SVAN 106 User MANUAL
_
56
Changing the cursor position
The user may change the cursor position
by means of the <
3 3 3 3
>, <
4 4 4 4
> push-buttons.
The appropriate value is presented in the
line below the plot.
<
3 3 3 3
> …
When Logger view is switched on there is also combined view of logger
plot and the result presentation available.
6.2 Setting the result presentation parameters – Plot Scale
The Plot Scale sub-list enables the user
to change the plot scale of results
presentation.
<ENT>
Setting the scale of the measurement results presentation
Two options are available: Linear and Logarithm. In the case of the first
one the graphical presentation and the units both are linear. In the latter
case the graphical presentation is given in the logarithmic scale and the
measurement results are expressed in decibels (the result is related to the
values set in the Reference Levels (path: Menu / Auxiliary Setup /
Reference Levels).
Scaling the vertical axis of the graphical
mode presentation
The Dynamic position appears when the
Logarithmic value of Scale parameter was
chosen. The Dynamic parameter enables
the user to select the proper scaling of the
graphical mode presentation. In the case of
the vertical axis one can obtain the double,
four times and eight times expansion (as
the default the vertical axis corresponds to
=>